Air-O-Swiss AOS 7135 Service Manual download pdf (Page 11)

FGH

A) On-off switch

Switch the air humidifier on or off by pressing button A.

B) Cleaning indicator

If symbol B and «CLEAN» appear on the display, the appli-

ance should be cleaned as recommended by the manufac-

turer. This symbol comes on automatically every 2 weeks,

depending on the level of use. The display can be reset by

depressing button A until light disappears.

C) Hygrostat (setting the humidity level)

Set the desired humidity in % by pressing button C. A

relative humidity of between 40% and 60% is recommen-

ded. The humidity can be set between 40% and 75%. The

measurement accuracy is +/- 5%. As soon as the humidity

exceeds the desired setting, the appliance switches off. The

device does not switch off if the display is set to «Co» (conti-

nuous operation). The desired value will be indicated during

selection. After a few seconds, the display automatically

shows the current value.

D) Empty indicator

The water level is easy to see, thanks to the transparent

water tank. The appliance also alerts you when the water

tank is empty. The empty indicator is illuminated (symbol

D). Please read the chapter „Filling the tank“ for more

information.

A) On-off dial and regulation

of mist output

Turning the right-hand rotary dial clockwise switches the

appliance on and at the same time regulates the mist out-

put from low to high.

B) Hygrostat (setting the humidity level)

The desired humidity level can be set by turning the left-

hand rotary dial clockwise. A relative humidity of between

40% and 60% is recommended. You can achieve this level

by rotating the dial until it is roughly in the vertical posi-

tion. The measurement accuracy is +/- 5%. As soon as the

humidity exceeds the desired setting, the appliance swit-

ches off. The appliance does not switch off if the dial is

turned all the way to the right as far as the arrow symbol.

This activates the continuous operation function.

C) Operation with water pre-heating

Pressing the pre-heating button (at the bottom between the

two rotary switches) pre-heats the water to 176° F (80° C)

before it enters the nebulizer space. The mist will now be

emitted at a pleasant 104° F (40° C). The advantages of

this are that the room temperature does not fall and water

cleanliness is significantly improved.

D) Empty indicator

The water level is easy to see, thanks to the transparent

water tank. The appliance also alerts you when the wa-

ter tank is empty. The red empty indicator is illuminated

(symbol D). Please read the chapter „Filling the tank“ for

more information.

Operation of the 7133 model Operation of the 7135 model E) Setting the timer

With button E you can set the humidifier to operate for

between 1 and 9 hours, or on continuous operation. When

selecting the desired time, «TIME» will be shown on the

display. The display will automatically show the current

humidity value after a few seconds.

F) Mist output (regulating mist output)

The mist output can be regulated by pressing button F

several times. If the red bars are displayed, you have

selected the highest level of mist output.

G) Operation with water pre-heating

Button G is used to switch the pre-heating function on or

off. Switching the function on pre-heats the water to 176°

F (80° C) before it enters the nebulizer space. The mist will

now be emitted at a pleasant 104° F (40° C). The advan-

tages of this are that the room temperature does not fall and

water cleanliness is significantly improved.

H) Automatic mode and Sleep mode

The automatic and sleep mode «ZZZ» can be activated by

pressing button H. If the automatic function is activated

(«AUTO» appears on the display), the ideal air humidity is

maintained relative to the temperature. This is regulated

using the output quantity and the preset desired value. If

the «ZZZ» function is set, the desired humidity is 60%; the

time setting is automatically set to 6 hours; the heating

element is switched on. In addition, the output quantity is

regulated, depending on the difference between the desired

and the actual values.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 17 18 19

Comments to this Manuals

No comments

Air-O-Swiss AOS 7135 Service Manual Page 11

Comments to this Manuals